Some questions

[Stig]

Driving a Bagheera in snow is not more difficult than any other car but the salt ...

On the last trip I made with my Bagheeera -74 I was caught in heavy rain and since I have a dirt road the last 20 km to my home the rear wings behind the B posts were filled with several kilos of wet sand.
I am thinking of fabricating some sort of inner wings to prevent at least some of the dirt to get in.
Any ideas ?
Any risk of reducing cooling to the engine if I put a separating plate also between the wheel and engine compartment ?

Regards,

Stig

[Spyros]

Do you mean in front of the rear wheels ?
Then Matra closed the gap on the serie II Bagheera and I reproduced the closure on one of mine. Somewhere on the Bag-cafe but the search didn't work tody

Also on the last ones the where plates to separate the wheels from the engine
This is an example

[Stig]

Hi Spyros,

Yes I mean in the front of the rear wheels.
Thanks for the info. I will dig into the series 2 wreck I have and see if there is a template I can use.

Regards,

Stig