| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 [2] Print
Author Topic: How to renovate motor for electrical windows  (Read 30245 times)
hru
Sr. Member
****
Posts: 172


Murena Lover :-)


« Reply #15 on: December 29, 2007, 08:42:58 pm »

I think it is very usefull to have central locking system
(after all, there is a long distance over the middle seat each time your girlfriend rides along  Grin)

So, while everything is out of the doors, I tried to install a simple standard servo from NMD.
I took some pictures, see attached:

/Henrik
« Last Edit: December 29, 2007, 08:49:25 pm by hru » Logged

Matra Murena 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #16 on: December 29, 2007, 09:13:44 pm »

I have no photos, but I have a simple sketch drawn with a shaking hand  Wink

Hi Finn

Thanks for  the drawing !
It's a nice and easy solution, I think.

I had all parts out, except the locking ring.
To solve it, I drilled a small hole Ø3 in the angled side of the house.
After this, I could get the ring out and also reuse it.

see photo attached.

/Henrik


So you have fabricated a new brass bearing similar to the original one, or...?
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
hru
Sr. Member
****
Posts: 172


Murena Lover :-)


« Reply #17 on: December 30, 2007, 11:10:42 am »

Quote
So you have fabricated a new brass bearing similar to the original one, or...?

No, I just cleaned the rotor for rust and reused the original bearing, adding a little ceramic grease.
The problem was that the locking ring couldn't get out without special tools.
Logged

Matra Murena 2.2
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #18 on: June 13, 2012, 09:06:00 am »

Hello Maxderoswell.

From what I can see, it looks like the 405 has a double system, in which you can lock both doors from both sides. the aftermarked sets like the one you showed, often has a master(5 wires) for the drivers side and a slave(2 wire) for the passenger side. I just brought an aftermarked set myself, can post the diagram if needed.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
maxderoswell
Jr. Member
**
Posts: 44



« Reply #19 on: June 13, 2012, 08:26:05 pm »

Hello,

the problem is solved, the complete wiring is placed into mumu.

Just to finish the 2 doors wiring (looking + audio) into one.

Mathieu
Logged
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #20 on: June 14, 2012, 07:44:39 am »

Hello,

the problem is solved, the complete wiring is placed into mumu.

Just to finish the 2 doors wiring (looking + audio) into one.

Mathieu

Good to hear.
I'm doing the same job myself now, hav installed the two actuators, but not the wiring yet. I'm also having problems with the passengerside window mechanism.... And have no idea where to start.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
maxderoswell
Jr. Member
**
Posts: 44



« Reply #21 on: June 14, 2012, 10:17:42 pm »

What king of actuators ?

Mathieu
Logged
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #22 on: June 15, 2012, 08:09:11 am »

What king of actuators ?

Mathieu

This set. It looks like its identical to the one maxderoswell showed.


Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
maxderoswell
Jr. Member
**
Posts: 44



« Reply #23 on: June 15, 2012, 08:59:46 pm »

It's a current assembly.

If somebody have the original central loocking door system, is it possible to said me where the driver door motor takes his power.

Directly on the fuse board ?

Mathieu
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #24 on: June 19, 2012, 11:35:28 pm »

It's a current assembly.

If somebody have the original central loocking door system, is it possible to said me where the driver door motor takes his power.

Directly on the fuse board ?

Mathieu


Yes on the backup-tension 3 fusenumber F4 or F5 are usable according to the manual.



« Last Edit: June 19, 2012, 11:44:07 pm by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #25 on: June 20, 2012, 06:12:55 pm »

That diagram was super Oetker!

Now if only I could understand french...
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
maxderoswell
Jr. Member
**
Posts: 44



« Reply #26 on: July 27, 2014, 01:39:24 pm »

Hello,

this is my new wiring diagram.

In these one, there are a blue box (delay for roof light), universal HF locking kit (control the original 405 wiring without infrared modul replace by a switch).

Mathieu
Logged
roy4matra
YaBB God
*****
Posts: 1199



« Reply #27 on: July 27, 2014, 05:31:22 pm »

Hi everybody

Has anybody tried to renovate the motor for the electric window ?
Or is the easiest to by a new ?

/Henrik

The window motor is made by Rockwell (it has their logo on it) who made window motors for lots of cars.  I have seen this same motor fitted to many cars including various Renault and Mercedes of a similar age.  I don't think you can get the motor easily anymore, but there are probably a lot of second hand ones around.

Often the reason the motors go slow or stop is the bottom bearing bush seizes on the armature shaft.  You can often dismantle the motor, clean the bush and lubricate it and get the motor working again.  I have done this a number of times.  Why does it seize?  If you check the motor it has two holes in the casing near the bottom (to let water out) and the upper hole should have a plastic plug in it.  When the motor is fitted the other way up, the plug should be moved from one hole to the other so the open hole is always at the bottom.  Sometimes the plug is at the bottom and so the motor fills with water...


When I saw the title of this thread and read the first posting it was about the window motors.  After I posted my reply I see someone has 'hi-jacked the thread and changed the thread.  I wish people wouldn't do that.  Please start another thread if you want to talk about something different...

Regarding the central locking, yes all 1983 cars which had factory fitted 'central' locking, only had a master control on the drivers door and a slave on the passenger door.  Normally both front doors would have master units and if you fit a third party locking system this is what you fit - a master on both doors so no matter which you operate it operates the other side.  As for wiring, it has to be connected to the permanent 'live' circuit non-fused - not much point if it blows a fuse and then won't operate because the key system has broken or seized, or especially if you have removed the manual key system. (yes I have seen a Murena with no door manual key locks and only electric locking and a remote ultra-sonic activator).

One final warning, if you go to remote activation then make sure your key locks are cleaned, adjusted and well greased, because once you start using remote activation it could be years before you ever use the locks again.  And if the remote fails you want to know that the manual key locks will still work to get you in!

Roy
« Last Edit: July 27, 2014, 05:49:53 pm by roy4matra » Logged

Pages: 1 [2] Print 
« previous next »
Jump to: