| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Two Murena 1.6 queries  (Read 2169 times)
Sr. Member
Posts: 457

« on: July 20, 2008, 12:12:03 pm »

Two unrelated queries concerning my newly acquired 1.6 which I am sure you old hands can answer instantly!
Firstly, what is the procedure for draining and refilling the cooling system?  It looks horribly complicated and prone to all sorts of airlocks, but I can only find one air vent, in the top hose.
Secondly, where can I find the timing marks?  I would like to check the timing with a strobe.
Anders Dinsen
YaBB God
Posts: 2823

« Reply #1 on: July 20, 2008, 12:46:10 pm »

Cooling system isn't as bad as it sounds, but there is a procedure you should follow, which is documented here:


I can add that the easiest way to drain the system is to take off the lower radiator hose in the front end and drain it from there.

I'm afraid I can't help you with spotting the timing marks, but on the 2.2 they are most easily accessible on top of the flywheel through a cutout in the bell housing.

Good luck Smiley

'82 Murena 2.2 prep 142
'01 Grand Espace 24v
'08 Smart Fortwo 0,8 cdi
Pages: [1] Print 
« previous next »
Jump to: