| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Grommets  (Read 2738 times)
klumzer
Sr. Member
****
Posts: 370



« on: December 20, 2011, 05:24:55 pm »

Does anyone have a good idea how to replace the two grommets of the heating tubes? They have a special shape so I think it is not possible to buy new ones.
Maybe it is better to leave them untouched... or wrap a tape around it...

Logged
Oetker
YaBB God
*****
Posts: 1048



« Reply #1 on: December 22, 2011, 11:09:46 pm »

Find somewhere a Nissan Sunny 89-95
You will find this.


Mounted on a Murena it looks like this.

pic Godfried

Good luck
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #2 on: December 23, 2011, 12:14:00 pm »

Thanks.
It looks good. But it won't be easy to find that car...

After some research...
If the Sunny has air conditioner you will find this. It is a GTi version.
« Last Edit: December 23, 2011, 05:10:07 pm by klumzer » Logged
Oetker
YaBB God
*****
Posts: 1048



« Reply #3 on: December 27, 2011, 11:34:52 pm »

In that type all gommets are in use.
You need the simple 1.4/1.6 that have the blinding rubbers.
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
maxderoswell
Jr. Member
**
Posts: 39



« Reply #4 on: June 09, 2012, 08:04:43 pm »

Hi,

you can find these into Nissan Primera 95.

2 grommets attached together but only the little is good.

To check in function to year.

Mathieu
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #5 on: June 09, 2012, 10:37:39 pm »

Thanks.
Finally I managed to find one (in a Sunny) after a lot of searching. The other one has been replaced by a simple closed grommet (dia 38mm) after punching a tight hole on it for the cooling hose. At the left side it is almost invisible because of the brake master cylinder. It looks quite good but the Nissan part is better, that is perfect.

I checked some car breaker yards for another Nissan grommet but they were not so helpful. A rubber grommet is a cheap shit for them, not a good business. It was not worth opening the bonnet - they thought...  Undecided
« Last Edit: June 09, 2012, 10:40:09 pm by klumzer » Logged
maxderoswell
Jr. Member
**
Posts: 39



« Reply #6 on: July 06, 2012, 10:34:25 pm »

Hi,

have you any idea for the grommet of the speedometer cable ?

Greets Mathieu
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #7 on: July 07, 2012, 11:44:41 am »

The speedocable has not been installed yet. The dashboard is in pieces so I did not deal with that grommet but I will check it next week.
Logged
Pages: [1] Print 
« previous next »
Jump to: