|
Home
|
Blogs
|
Help
|
Search
|
Login
|
Register
|
MatraSport Forum
>
Each model
>
Murena
>
Panel Gaps
« previous
next »
Pages:
[
1
]
Print
Author
Topic: Panel Gaps (Read 9192 times)
murramor
Sr. Member
Posts: 123
Email
Panel Gaps
«
on:
December 21, 2018, 03:18:04 am »
It will soon be time for me to mount the front wing panels. Because the original pop rivet holes were glassed over when repairing the front wings, I can adjust the panel gap between the front of the door and the wing by moving the wing a few mm in either direction. If I move the wing backwards to minimize the gap between it and the door, the gap between it and the front bumper section does not grow too noticeably. However, rather than having a minimum gap, I would like it to be as correct as possible.
Here is my question. Could someone with an original car, please measure their panel gap between the wing and the door?
regards
Ron
Logged
Ron Murrell
Sydney, Australia
murramor
Sr. Member
Posts: 123
Email
Re: Panel Gaps
«
Reply #1 on:
December 28, 2018, 10:39:13 am »
Perhaps I narrowed it too much! Can anyone please measure their panel gaps? I jest need s o me tghing to go on.
Logged
Ron Murrell
Sydney, Australia
FOB
Jr. Member
Posts: 47
83 Murena 2.2
Email
Re: Panel Gaps
«
Reply #2 on:
December 29, 2018, 11:08:22 am »
Hi Ron
Hope this helps:
Drivers side app. 3.8mm, passenger side app. 4.5mm
Regards Finn, and happy New Year
Logged
murramor
Sr. Member
Posts: 123
Email
Re: Panel Gaps
«
Reply #3 on:
December 29, 2018, 08:47:52 pm »
Thanks Finn. I think 4mm is a nice number to try for. Happy New Year to you also and try to watch our Sydney fireworks. They promise to be good this year!
Logged
Ron Murrell
Sydney, Australia
Pages:
[
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
J
-----------------------------
-----------------------------
M
-----------------------------
-----------------------------
0
-----------------------------
Loading...