| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Murena wheel bolts/studs  (Read 2575 times)
Tricky Dicky
Jr. Member
**
Posts: 32


« on: May 21, 2007, 07:52:04 pm »

Does anyone know the part No for the wheel bolts for a Murena. I need to replace as the locking nut spanner is knackered so I need 4 new wheel nuts. Would Peugeot stock them?
Thanking you in anticipation.
Tricky Dicky
Logged
krede
YaBB God
*****
Posts: 1166



« Reply #1 on: May 21, 2007, 08:07:59 pm »

Im pretty sure you can get a set at your local tire dealer.. just show him one of the old ones.
I bought a set of "special" bolts to allow 4x100 rims to be used, and the murena wheel bolts seemed a pretty standard item.
« Last Edit: May 22, 2007, 03:06:56 pm by Lennart Sorth » Logged
lewisman
Sr. Member
****
Posts: 423


« Reply #2 on: May 22, 2007, 12:08:46 am »

I am pretty sure they are the same as Vauxhall /Opel wheel bolt i.e. M12 x 1.5mm but check the length and make sure they are ones for alloys (all locking bolts will be fine). 

Talbots used a short head bolt with a plastic cover a lot.

Alfas and Fiats use M12 x 1.25mm
Logged
Pages: [1] Print 
« previous next »
Jump to: