• Welcome to MatraSport Forum.
  • Log in
  • Sign up
 

MatraSport Forum

Simple Machines Forum
Main Menu
Main Menu
  • Home
  • Search
  • MatraSport Forum
  • ► Each model
  • ► Espace
  • ► 99 jeon 2.0 16v lower ball joint

99 jeon 2.0 16v lower ball joint

Started by shawnvic, February 11, 2009, 12:38:52 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

shawnvic

  • *
  • Newbie
  • Posts: 19
  • Logged
99 jeon 2.0 16v lower ball joint
February 11, 2009, 12:38:52 PM
has anyone removed one off these can they be knocked out,or is it a case of a new arm.thanks

Anders Dinsen

  • Administrator
  • *****
  • YaBB God
  • Posts: 3,247
  • Location: Bagsvaerd, Denmark
  • Logged
Re: 99 jeon 2.0 16v lower ball joint
#1
February 13, 2009, 08:16:37 AM
Renault only sells a complete new arm, but they can be removed and replaced with cheaper alternative parts.

I haven't done the job myself, but my garage replaced one on my JE0G in December by removing the old joint from the arm.

- Anders
1982 Talbot Matra Murena 2.2 prep 142 (under restoration)

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2

Martin Tyas

  • ****
  • Sr. Member
  • Posts: 278
  • Espace, because it's worth it!
  • Location: Doncaster, England
  • Logged
Re: 99 jeon 2.0 16v lower ball joint
#2
February 13, 2009, 11:22:48 AM
If I remember correctly Euro Car Parts can supply the ball joints for less than £20 each and also stock wishbone bushes if you want to do a more comprehensive suspension refurb whilst you are replacing the balljoint.

I haven't replaced them on my Espace but from past experience on other cars they do take some getting out... sometimes they will come out with brute force and ignorance but usually best to use a hydraulic press. A soaking with penetrating oil sometimes helps separation of the balljoint from the wishbone but often you may need some heat.

On some original equipment assemblies the balljoints are riveted to the wishbone so the rivet will also need drilling out but the aftermarket balljoint kits usual come with a nut and bolt to replace the rivet.

Martin
1968 Cessna 182L Skylane
1991 BMW 520i SE Auto
2002 Grand Espace 2.2dCi "The Race"
2003 Astra 1.8i Cabriolet "Edition 100"
2011 Insignia SRi VX-Line Red
2011 Honda VT1300CX Fury

Print
Go Up Pages1
User actions
  • MatraSport Forum
  • ► Each model
  • ► Espace
  • ► 99 jeon 2.0 16v lower ball joint
User actions
Print
  • Help | Terms and Rules | Go Up ▲
  • SMF 2.1.6 © 2025, Simple Machines