Hi, I have here a dci with 9 faults logged in the ecu that won't go away. Checking one of them (air flow sensor) there is a high resistance between one lead of the afm plug & the ecu socket!! Now as far as I can tell there is no connector in-line so where is the bad connection causing the hr, the connectors look good as far as I can see.
Faults:
df 091 sensor supply no. 1 volts
df 084 egr valve position sensor circuit
df 074 boost pressure sensor
df 071 track 1 pedal sensor circuit = 1. def sensor feed fault
df 019 air flow sensor circuit = 1. def sensor feed fault
df 067 fuel pressure sensor circuit = 1.def sensor feed fault
df002 water temp sensor circuit = 1. def sensor feed fault
6g torque reduction = open circuit or cc to earth
12g pressure mod solenoid valve circuit 3 = open circuit or cc to earth
I know I need to check main fuses & master earths, just wondering if anyone has the wiring diaf .pdf for this as my Renault wiring disk is corrupt. I have been looking at Laguna but would rather have the right one.
Any known faults?
Also before I go, I replaced the ecu, bii, & key transponder on this vehicle because of a duff ecu. I have had to remove the alarm fuse because it keeps going off, it no longer works with the central locking. Has it noticed being tampered with? Is there a easy reset or done with clip proggramming.
Thanks in advance
Brian