| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Passenger seat removal  (Read 5088 times)
mhopley
Newbie
*
Posts: 11



« on: August 29, 2010, 10:21:57 pm »

Can anyone tell me how to remove the passenger seat.
It seems to be attached by the headrest but I can't find out how to access the bolts.
Logged
davidewanprice
Guest
« Reply #1 on: August 30, 2010, 12:16:42 am »

From memory the seat is bolted behind the seat towards the head rest, I think that if you pull the seat at the pivot point (between the bottom and back section) the seat should lift up, the bottom section is only held in place at the from by two L shaped pronges of metal that stick through the floor. Once you've got this out I think you can access the main bolts holding the seat. Undo these and its free. Its a while since Ive done it so forgive me if I'm wrong. Hope this is of help.
Logged
mhopley
Newbie
*
Posts: 11



« Reply #2 on: August 30, 2010, 10:29:57 pm »

Thanks for the reply.
I have released the seat base but I still can't find the bolts in the headrest.
I'll have another look tomorrow.
Logged
GP
Guest
« Reply #3 on: August 30, 2010, 11:40:51 pm »

Thanks for the reply.
I have released the seat base but I still can't find the bolts in the headrest.
I'll have another look tomorrow.

Some photo's to help. Use a 13mm socket on an extension and you can get to the 2 x 13mm headed bolts which are inboard on the  passenger seat headrest.

GP
Logged
mhopley
Newbie
*
Posts: 11



« Reply #4 on: September 01, 2010, 09:01:35 pm »

Thanks for the photos. I still have not had a chance to investigate yet, but at least I know where to look now.
Logged
Pages: [1] Print 
« previous next »
Jump to: