| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: fitted repaired bii board and instrument cluster . repaired by bba-remans  (Read 3652 times)
fragmaster
Newbie
*
Posts: 9


« on: December 13, 2010, 05:38:50 pm »

ok so fitted  bii board and intrument cluster, car starts fine but i notice when i turn ignition on that the temperature lamp flashes continuosly on bottom of scale, also the diesel heater indicater light does not come on but car seemingly heats as car does start, upon starting a little heart beat warning then shows in the display for about 30 seconds orange in colour and when this goes out the temperature light is the only problem that is left its still flashing, does the car need linked to a computer to have these lights cancelled or is there some other faults and that is the reason that the bii board developed faults in the first place?
Logged
renaultbiler
Sr. Member
****
Posts: 418



WWW
« Reply #1 on: December 13, 2010, 08:46:19 pm »

Sounds like BII needs a reconfiguration to tell it what engine is in the car, seen this before. Renault CLIP tool will do this.
Logged

1980 Alpine A-310 w/GTA 2.5 V6 Turbo
2000 Grand Espace V6 24v Initiale: http://www.renaultbiler.no/forum/viewtopic.php?id=2529
2000 Scenic RXi 2.0 16v IDE aut DP0: http://www.renaultbiler.no/forum/viewtopic.php?id=3751
1982 R20TX 2.2
Service Online: www.servicehefte.net/servdata/?cid=qqkX
Pages: [1] Print 
« previous next »
Jump to: