| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: tail lights  (Read 2133 times)
klumzer
Sr. Member
****
Posts: 370



« on: July 31, 2011, 12:30:27 pm »

Is it possible to use the parts of the tail light of Talbot Horizon on Murena?
I know the lenses are not the same but what about the plate and the seal?
Has anyone tried it?

I found a picture. It does not look the same but very similar to Murena tail lights.

Another question. The inner covers of the tail lights are missing in my car. Could anyone send me a photo of it. It is a plastic cover or a piece of carpet?

Logged
michaltalbot
YaBB God
*****
Posts: 566



« Reply #1 on: July 31, 2011, 02:04:15 pm »

Hello, as far as I know, this piece is possible to use from Horizon, but think that depense on its producer (Cibie or Seima).

There were two types of finition of the rear side - one had inner covers demountable from boot, this covers were from metal, painted in black colour. Other one had then as the part of the rear panel of the boot.
Logged

klumzer
Sr. Member
****
Posts: 370



« Reply #2 on: August 01, 2011, 05:33:20 pm »

Thanks.
My car probably had the first version, because I can see some clamps around the lights on the inner side.

The attached photo shows a Cibie tail light panel.

My tail lights are not bad but I should change the seals. I looked for them in the Murena parts catalog but did not find any part number. That is why I wanted to use alternative parts.
Logged
Pages: [1] Print 
« previous next »
Jump to: