| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Front shockers?  (Read 6777 times)
lewisman
Sr. Member
****
Posts: 442


« on: October 24, 2006, 11:19:28 pm »

Are the front shockers the same as the Horizon?  I know the valve ratings will be different as there is noweight at the front end of a Murena  but I don't mind if they are a bit harder.
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #1 on: October 25, 2006, 09:32:30 am »

You would normally not want to stiffen the front by using harder shocks as this will lead to small but significant oscillations in the suspension, which worsens handling and reduces brake efficiency. Shocks and springs are generally mated to each other. That said, a pair of wrong shocks may be better than a pair of worn out ones Wink
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
krede
YaBB God
*****
Posts: 1172



« Reply #2 on: October 25, 2006, 01:03:49 pm »

You should also remember that even though the engine is in the back, the front axle still has a load of some 435kg's (2.2)..
Being made of cardboard, balsawood and spit, im not sure the Horison, would weigh much more.
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #3 on: October 25, 2006, 06:24:19 pm »

Being made of cardboard, balsawood and spit, im not sure the Horison, would weigh much more.

Hahahah!!! And rust!
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Pages: [1] Print 
« previous next »
Jump to: