| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: murena 2.2 cylinderhead dowel pins  (Read 3927 times)
krede
YaBB God
*****
Posts: 1172



« on: July 31, 2015, 04:23:19 pm »

Does anybody know where to get hold of a set of these ? Mine has been lost when I had the cylinder head done    Sad
Logged
Jon Weywadt
YaBB God
*****
Posts: 1002



« Reply #1 on: July 31, 2015, 05:06:01 pm »

Does anybody know where to get hold of a set of these ? Mine has been lost when I had the cylinder head done    Sad
I worried about those myself because one stuck in the head and the others remained in the block. I managed to remove it from the head an set it in the block, where they remained safe.

But to your question, I would measure the holes and look for a steel pipe with the correct diameter and a 1/8" wall thickness. As I recall they are appx. 2 cm long. Edges slightly beveled.
If hou have a lathe make your own.

« Last Edit: July 31, 2015, 06:08:23 pm by Jon Weywadt » Logged

Matranaut par excellence Cool
krede
YaBB God
*****
Posts: 1172



« Reply #2 on: July 31, 2015, 05:09:27 pm »

Yes . I will probably end up making them myself.
Logged
Pages: [1] Print 
« previous next »
Jump to: