| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Anti Roll Bar / Wishbone gap: Help measuring please.  (Read 3575 times)
Gib
Sr. Member
****
Posts: 128


« on: November 28, 2016, 09:09:37 am »

As per the drawing below could some body measure to the nearest 1/2cm the gap from the top of the wishbone to the underside of the anti roll bar. I think my home made setup is around 20mm too long as on full droop the end of the steering rack ball joint is touching the anti roll bar.

Logged
GP
Sr. Member
****
Posts: 302



« Reply #1 on: November 29, 2016, 05:34:11 pm »

Answer:75mm (depending on how much you compress the standard drop link rubbers).
« Last Edit: November 30, 2016, 07:46:09 am by GP » Logged
Gib
Sr. Member
****
Posts: 128


« Reply #2 on: November 30, 2016, 09:01:32 am »

Thanks for the help.
Current measurement is 120mm so I have to lose 45mm which is doable.

Should have measured and set this up first before making the parts!
Logged
Pages: [1] Print 
« previous next »
Jump to: