wheels /tyres help

[Waldo]

Let me join the discussion...

First of all someone quoted the wrong orig. wheel dimensions for the murena.
They correct dimensions are:
14x6" ET28

Also would people please incl. their offset when suggesting wheels that could be use.

I was looking to use 15x6" on the front and 16x6.5" rear.
Therefore I have bought a set of 16x6.5" ET25 that I was planning to use, but the rims are no longer availible in 15".
The ET25 offset results in pretty much the perfect fit with the 6.5" width.

If anyone are looking for new wheels, you can use the Fiat Barchetta as reference, as they have roughly the same data as our Murena's...

They are for sale in case anyone in Denmark are looking from new wheels?
It's the SMC type Z in silver...
http://www.gumibolt.hu/alufelni/fenykepek/Z.jpg

looking for 2.000 DKK (270€) for the 4 rims.
They are brand new and incl. mounting bolts etc.

Should fit nicely with the following choice of tires:
Front                                  Rear
185/50-16  (+2.4%)           195/50-16 (+2%)
195/40-16  (-2.6%)            205/50-16 (+3.7%)
195/45-16   (+0.75%)        205/45-16 (+0.2%)

Regards,
Valdemar

[phil75]

Correct dimension is not ET28 but ET29

[phil75]

[Oskar]

Phil - is your car lowerd at the back?

[phil75]

Phil - is your car lowerd at the back?

No, the height is of origin to the rear (Front is also with the height of origin)

[eric]

http://img525.imageshack.us/my.php?image=dsc02456cl7.jpg

I fit those wheels under my car ;AEZ Xylo      4x98 - ET 28 - 15"- 58,1 mm and 6.5 J
and my car is lowerd about 25mm back and 15 mm front
Tyres  front 195x 50  back 225 x 50

[lewisman]

That would be my choice of sizes on 15" rims

[Oskar]

will these rims fit ?
http://cgi.ebay.com/15-Rapid-Alloy-wheels-FIAT-PUNTO-4-Stud-4x98-114-NEW_W0QQitemZ350044840787QQihZ022QQcategoryZ28648QQrdZ1QQssPageNameZWD2VQQcmdZViewItem?_trksid=p1638.m122

[Anders Dinsen]

will these rims fit ?

Yes, they should be ok.

[darrenheli]

i Got some wheels at last , taken me meny years to decide what to get 

[GP]

Very nice too. I think I see something lurking behind them that's looks a bit cutting edge?

How about some pictures of them front and rear?

GP

[Jon Weywadt]

i Got some wheels at last , taken me meny years to decide what to get 

Hi Darren.

Wheels look good. 
Tell me what kind of brake caliper is it that I see on one of the photos. Did you have to make any modifications to the mounting points and disk?

Regards.
Jon.

[darrenheli]

i use 4 piston front calipers radial mount and 4 piston rear calipers with handbrake lug mount, 315mm front discs and 300mm rear

[GP]

More pictures of the rear end please!

GP

[Matra_Hans]

You can find the suplier of the brakes here: http://www.hispecbrake.co.uk/

I belive that the one Alfa V6 in Denmark is equiped with Hi Spec Brakes

Hans