| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 [2] Print
Author Topic: Changing gearbox diff seals  (Read 10212 times)
Titus
Sr. Member
****
Posts: 145



« Reply #15 on: March 31, 2010, 09:30:13 pm »

Does this help?
Logged

1.6 Murena
Oetker
YaBB God
*****
Posts: 1048



« Reply #16 on: April 01, 2010, 12:57:42 am »

@ titus,

Think that is 1.6
We are on a 2.2 differential, wich is different.
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
suffolkpete
Sr. Member
****
Posts: 452



« Reply #17 on: April 01, 2010, 09:41:05 am »

Titus,
That's a crankshaft rear seal.  We're talking about the one where the driveshaft goes into the diff.
Logged
roy4matra
YaBB God
*****
Posts: 869



« Reply #18 on: April 02, 2010, 01:40:28 am »

Like I intended, I cleaned up the dirty area yesterday evening, and while it still looks clean, there's a thin film of oil covering the surface below the driveshaft after todays driving. There are no other indications of leaks on the gearbox. So the seal has definitely failed...

/Anders

Hello Anders,

You should remove the N/S trailing arm, and short drive shaft, which should come out on yours as it was well greased, and then you can change the seals.  You can remove the arm and shaft together to save removing the hub nut and shaft from the hub.  I've done this a number of times.  You have the lip seal which I gave you, and an 'O' ring if you need it, is part number 3010.15  Should be a straight forward job!  Make sure you lubricate new lip seal before you put the drive shaft back.  Dry lip seals are quickly destroyed.

Roy
Logged

Oskar
Sr. Member
****
Posts: 280



« Reply #19 on: April 03, 2010, 02:00:53 pm »

I wasnt very precise but  ca 48mm and ca 35mm was it on the driveshafts seal
Logged

peugeot 205 gti
murena 1.6
Titus
Sr. Member
****
Posts: 145



« Reply #20 on: April 07, 2010, 09:46:07 pm »

Titus,
That's a crankshaft rear seal.  We're talking about the one where the driveshaft goes into the diff.
A little bit eager to post Smiley
Logged

1.6 Murena
Pages: 1 [2] Print 
« previous next »
Jump to: