| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Murena V6  (Read 2010 times)
alvinisztika
Newbie
*
Posts: 15



« on: September 15, 2013, 12:09:38 pm »

Alfa Romeo 164 3.0 V6 12v  I would like to put the original 2.2 murena. I want to use as a street car. So I have some questions, like electronics, cabling, motor subframe, etc.. I care how expensive this operation. alpha gearbox can be left?

(Sorry for my English, google translator)
Logged
northmurena
Sr. Member
****
Posts: 203



« Reply #1 on: September 15, 2013, 02:16:38 pm »

The best answer to this will you get at Carjoy. You will need also a subframe what you can get there.

Hilsen
Kai
Logged
matramurena
Full Member
***
Posts: 78



« Reply #2 on: September 16, 2013, 11:13:32 pm »

Are you planning to put a Alfa V6 in a 2.2 Murena, or get rid of a V6 and replace it with the original engine again?

Fitting the Alfa V6 took me 7 years, but once it works, it's worth the wait. The engine really suits the car in my opinion. Cost: expect to spend a lot. The engine's are old and the wiring-bundle should be made new because the insulation of the wires fails. Carjoy has a good solution to get the gear-movements very tight. You need new exhaust parts to get the exhaust fitted. Fuel-tank should go in the front or should be altered. It really is quite some work...

But as mentioned before; worth the while.

Martijn
Logged

1983 Matra Murena V6 (AR engine)
2003 Matra Avantime 2.0T Expression
2003 Matra Avantime V6 Privilege
Pages: [1] Print 
« previous next »
Jump to: