|
Home
|
Blogs
|
Help
|
Search
|
Login
|
Register
|
MatraSport Forum
>
Each model
>
Murena
>
Murena V6
« previous
next »
Pages:
[
1
]
Print
Author
Topic: Murena V6 (Read 9410 times)
alvinisztika
Newbie
Posts: 15
Email
Murena V6
«
on:
September 15, 2013, 11:09:38 am »
Alfa Romeo 164 3.0 V6 12v I would like to put the original 2.2 murena. I want to use as a street car. So I have some questions, like electronics, cabling, motor subframe, etc.. I care how expensive this operation. alpha gearbox can be left?
(Sorry for my English, google translator)
Logged
northmurena
Sr. Member
Posts: 210
Email
Re: Murena V6
«
Reply #1 on:
September 15, 2013, 01:16:38 pm »
The best answer to this will you get at Carjoy. You will need also a subframe what you can get there.
Hilsen
Kai
Logged
matramurena
Sr. Member
Posts: 125
Email
Re: Murena V6
«
Reply #2 on:
September 16, 2013, 10:13:32 pm »
Are you planning to put a Alfa V6 in a 2.2 Murena, or get rid of a V6 and replace it with the original engine again?
Fitting the Alfa V6 took me 7 years, but once it works, it's worth the wait. The engine really suits the car in my opinion. Cost: expect to spend a lot. The engine's are old and the wiring-bundle should be made new because the insulation of the wires fails. Carjoy has a good solution to get the gear-movements very tight. You need new exhaust parts to get the exhaust fitted. Fuel-tank should go in the front or should be altered. It really is quite some work...
But as mentioned before; worth the while.
Martijn
Logged
1983 Matra Murena V6 (AR engine)
2003 Matra Avantime 2.0T Expression
2003 Matra Avantime V6 Privilege
Pages:
[
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
J
-----------------------------
-----------------------------
M
-----------------------------
-----------------------------
0
-----------------------------
Loading...