| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Gear Linkage help please!  (Read 1067 times)
TimS
Sr. Member
****
Posts: 172



« on: June 05, 2014, 06:28:10 pm »

In an attempt to improve my gearchange I took the gear lever and top hat washer off to examine them for wear. Put it all back together and now I can't always get 5th or reverse.

I wonder if i turned the gear lever around 180 degrees by accident when i put it back, but I'm usually pretty careful.

The drawing that I used for reference was not much help. Can anyone show in what order the washer, nut and base should go together?

These are all the photos I took - it wasn't the best light:
https://www.dropbox.com/sh/wqekop3viwn0wfs/AAD2xloibEso8mPn3VrT1J0Ia

I need to get it working again and then go back to trying to reduce the play in it.
« Last Edit: June 06, 2014, 05:19:17 pm by TimS » Logged
Jon Weywadt
YaBB God
*****
Posts: 962



« Reply #1 on: June 05, 2014, 08:54:14 pm »

On my Murena there is a detent to prevent you from accidentaly going into reverse. If you turn the shifter 180 degrees that may be the problem. Will look for photos.
Logged

Matranaut par excellence Cool
Pages: [1] Print 
« previous next »
Jump to: