Murena Heater Valve and stopping hot air

[TimS]

Has anyone taken apart or replaced the heater control valve in the front bay?

Although fully disconnected from the cables and closed, mine is still allowing hot air to come out of the vents. Are there any serviceable parts inside?

Has anyone managed to get completely cool air through?

[JV]

Herman wrote a topic about using a part of a Golf valve:
http://www.matramania.be/phpBB3/viewtopic.php?f=18&t=2191&p=35367&hilit=kraan+Golf#p35367

[TimS]

Thanks that certainly looks workable and cheaper than Simon.

[Jon Weywadt]

Has anyone taken apart or replaced the heater control valve in the front bay?

Although fully disconnected from the cables and closed, mine is still allowing hot air to come out of the vents. Are there any serviceable parts inside?

Has anyone managed to get completely cool air through?

I have used a leather piece to protect the hose and then clamped it shut with a pair of vice grips. No heat at all after that. 😊

[TimS]

I was thinking of doing that as a temporary fix for the summer.
Did you clamp the hose going in to the heater valve?
No problems?

[Jon Weywadt]

I was thinking of doing that as a temporary fix for the summer.
Did you clamp the hose going in to the heater valve?
No problems?

Sorry about the delay in answering. But, yes I clamped the hose going into the valve. When I removed it in the fall it returned to original shape ok. So no problems. Of course the hose was relatively new.

[JL]

Hi Tim

Why not fit a manual tap for now like this - no risk of hose damage

https://www.carbuildersolutions.com/uk/15mm-58-heater-valve

and at least you can turn the heat on if we have a Summer cold snap!

Regards
John

[Oetker]

I was thinking of doing that as a temporary fix for the summer.
Did you clamp the hose going in to the heater valve?
No problems?

Temporary fix before reviving the valve.
Garden valve, lastet for 4 years.