| Home |    Blogs |  Help |  Search |  Login |  Register |   
MatraSport Forum > Each model > Murena > crack and hole in gearbox
 « previous next »
Pages: [1] 2 Print
Author Topic: crack and hole in gearbox  (Read 17520 times)
Oskar
Sr. Member
****
Posts: 285
« on: October 12, 2008, 06:53:16 pm »
after investigate the problem with starting the murena I found a big hole in the gearbox house round the cluth and a crack in the house that the starter sits on. GOT DAMNIT!!  No more murenadriving Sad
im not that strong so i can push it everytime I whant to drive  Undecided

what to do?  change engine and gearbox (xu9jaz) or try to find a working gearbox?
Logged
peugeot 205 gti
murena 1.6
suffolkpete
YaBB God
*****
Posts: 544
« Reply #1 on: October 12, 2008, 07:49:10 pm »
You could find a scrap gearbox with a good housing and change the housings over.  That would be the lowest cost option.  Changing the engine would be a major project and you would not have an original car any more.
Logged
Megatech
Jr. Member
**
Posts: 25


I'm a llama!
« Reply #2 on: October 12, 2008, 09:04:27 pm »
The bellhousing surrounding the clutch is a special Matra part, that connects the Chrysler/Simca engine with the Citroen/Lancia gearbox.

You need to investigate, why it cracked. I have never heard of this problem before.

Simon can supply a "new" one.

You have to take out the gearbox to refit the new one. While out consider a refreshing of the syncromesh.
Logged
Waldo
Sr. Member
****
Posts: 187

Diesel power :o)
« Reply #3 on: October 13, 2008, 01:46:31 am »
Hi Oskar,

Very sorry to hear about you problems!
If nothing else, I got a spare engine with gearbox at my workshop.
It did work perfect up until it was taken out of my HDI project car...

Let me know if you are interested.

Regards,
Valdemar

PS: Can help wondering what you did to the car at that trackday  Roll Eyes

Quote from: Oskar on October 12, 2008, 06:53:16 pm
after investigate the problem with starting the murena I found a big hole in the gearbox house round the cluth and a crack in the house that the starter sits on. GOT DAMNIT!!  No more murenadriving Sad
im not that strong so i can push it everytime I whant to drive  Undecided

what to do?  change engine and gearbox (xu9jaz) or try to find a working gearbox?
Logged
Oetker
YaBB God
*****
Posts: 1097
« Reply #4 on: October 13, 2008, 02:15:35 am »
This seemes to be a common failure on the 1.6
In this topic 2 others have this problem (see pic)
http://oscar.messageboard.nl/7101/viewtopic.php?t=975

I translate why it happened.
2 reasons were mentioned in several topics.
Someone forgot to mount the support part for the starter.
The engine mounting was warn.

If it is not to bad, its possible to weld.
Since I don't have a 1.6, I cant verify.

good luck
Logged
I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
Oskar
Sr. Member
****
Posts: 285
« Reply #5 on: October 13, 2008, 08:29:33 am »
yes
thats the same crack
and the starter only sat with the the 2 upper screws to the house.

Logged
peugeot 205 gti
murena 1.6
Oskar
Sr. Member
****
Posts: 285
« Reply #6 on: October 20, 2008, 04:47:27 pm »
hmm  is it easier to weld it and hope it last or get a spare gearbox?

I dont know from wich citroen model I can try to find one?
I really liked this gearbox, synchro worked very good in all gears

and im on a tight budget  Sad
Logged
peugeot 205 gti
murena 1.6
Waldo
Sr. Member
****
Posts: 187

Diesel power :o)
« Reply #7 on: October 20, 2008, 04:53:00 pm »
Don't know if you did see my reply, but I got a 1.6 gearbox that was working fine until I took it out of my HDI project car...

I don't expect it to cost much, as a guide line I sold a 2.2 gearbox, that I didn't know the condtion of, for 500 DKK no less than that, preferable a bit more  Wink

Let me know if it's of any interest... Not sure when I going to sweden next time, but around christmas at the latest...


Quote from: Oskar on October 20, 2008, 04:47:27 pm
hmm  is it easier to weld it and hope it last or get a spare gearbox?

I dont know from wich citroen model I can try to find one?
I really liked this gearbox, synchro worked very good in all gears

and im on a tight budget  Sad
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #8 on: October 20, 2008, 05:50:51 pm »
Quote from: Oskar on October 20, 2008, 04:47:27 pm
I really liked this gearbox, synchro worked very good in all gears

Well it looks like Waldo can rescue you, and you don't need to scrap the old gearbox, you can just swap over the bell housing.
Logged
1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Oskar
Sr. Member
****
Posts: 285
« Reply #9 on: October 20, 2008, 08:10:18 pm »
are you going to biltema soon?  Cheesy Grin Wink Smiley Cool Shocked Roll Eyes Tongue Kiss Kiss
Logged
peugeot 205 gti
murena 1.6
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #10 on: October 20, 2008, 08:50:37 pm »
Quote from: Oskar on October 20, 2008, 08:10:18 pm
are you going to biltema soon?  Cheesy Grin Wink Smiley Cool Shocked Roll Eyes Tongue Kiss Kiss

Hmm... I might actually, as I need a new fuel pump for my carb project, so... perhaps! Wink Are there any motorsport events coming up in southern Sweden that we (my lads and I) could attend?

Another option is to ask one of my colleagues, who lives in Malmö if he can bring it over to you. Only problem is that I think he's taking the train... a gearbox is a "little" heavy for that. But I'll ask him when I see him again (he stayed home today with a cold Sad )
Logged
1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Waldo
Sr. Member
****
Posts: 187

Diesel power :o)
« Reply #11 on: October 20, 2008, 10:35:46 pm »
I also got a friend that lives in Helsingborg... and works in Denmark!
I know it's not as close to you as Malmö, but at least you don't need to cross the bridge!
I'll e-mail him and ask if he's coming to cph soon  Wink
Logged
Oskar
Sr. Member
****
Posts: 285
« Reply #12 on: October 21, 2008, 06:39:44 pm »
I love you guys  Cheesy
I might take trip to germany to get some fluids  Roll Eyes
Ill stay in touch!
Logged
peugeot 205 gti
murena 1.6
Jacobosterlindh
Full Member
***
Posts: 88
« Reply #13 on: October 29, 2008, 12:26:54 pm »
Quote from: Oskar on October 21, 2008, 06:39:44 pm
I love you guys  Cheesy
I might take trip to germany to get some fluids  Roll Eyes
Ill stay in touch!

Men Oskar då! Du kan väl slänga i något roligare när du ändå råkat ut för detta. Varför inte en smaskig TU-motor? med turbo? =)

Why don't  build it with an PSA Tu-engine with turbo instead? would be much more fun!
Logged
Oskar
Sr. Member
****
Posts: 285
« Reply #14 on: November 03, 2008, 01:01:52 pm »
how much do you charge for the gearhouse?  Smiley
Logged
peugeot 205 gti
murena 1.6
Pages: [1] 2 Print 
« previous next »
Jump to: