| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Murena 2.2 Solex 34CIC carburettor and induction for sale  (Read 11085 times)
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« on: August 07, 2009, 10:38:16 pm »

Since I have converted successfully to the twin sidedraught system, I'm now offering my Solex 34CIC carburettor with manifold, inlet knee, thermostatic vacuum switch (warm air induction system) etc for sale.



The carburettor originates from a low mileage car before being fitted on mine to replace a worn set of sidedraught Solex'es. It has run without problems on mine. There is no play in the throttle spindle and the carburettor is clean and intact. It has been sprayed with WD40 to keep repaining petrol from solidifying inside it. I recommend, however, a cleaning and renewal of gaskets on it.

I offer it complete with a good manifold, air filter connections etc, plus a set of new petrol hoses. All parts can be seen in the photos here:

http://gallery.dinsen.net/v/biler/Matra/technical/carb/forsale/

It is located near Copenhagen, Denmark. I can ship it anywhere in the world at your cost. Make me an offer! Cheesy

/Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #1 on: July 02, 2010, 06:45:30 am »

This is still for sale. Complete with manifold €200.
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
tog0035
Jr. Member
**
Posts: 25


« Reply #2 on: July 14, 2010, 09:29:45 pm »

hello anders could you tell me the price you are seeking.Have you got the main filter box  Regards TOG
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #3 on: July 14, 2010, 11:42:32 pm »

hello anders could you tell me the price you are seeking.Have you got the main filter box  Regards TOG

Indeed: 200€ plus shipping, which I think is quite cheap, but is based on what Simon charges for the carb itself. However, mine comes complete with inlet knee and manifold. I don't have the main filter box - or rather: I'm still using mine, but that shouldn't be difficult to find as the filter type is still used on many Peugeots, e.g. 106.

I can get a quote for shipping to UK tomorrow if you want?

/Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #4 on: August 30, 2010, 10:06:56 am »

Hello Anders, Could be interested it it, if you come and install and fix the engine while your at it  Wink Cheesy
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #5 on: August 30, 2010, 04:28:51 pm »

Hello Anders, Could be interested it it, if you come and install and fix the engine while your at it  Wink Cheesy

Haha! Cheesy
I'm afraid that's out of the question unfortunately!

What's your problem - is it still a non-starter?
/Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #6 on: September 01, 2010, 02:40:52 pm »

Aww.. darn it....


It has been sitting for some time, just got around to checking the distributor cap last day. And it was as I expected... Something has gone SERIOUSLY wrong there.... The cap was either 90 or 180 degrees of, so no wonder it just backfired op the carb.... after checking some more, it also looked like the distributor arm was misplaced 180 degrees to! Shocked Would have sworn there must have been someone else in the enginebay fidling around...
Unfortunately I got hit with the mother of all rainstorms later, so will try to reassemble it correctly this time Tongue, charge the battery, and see if we can it running again.

I do belive, since it has been running a little poor(too much air) the some of the previous  owners may have been trying to adjust the carb to compensate for the leak.
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Pages: [1] Print 
« previous next »
Jump to: