| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: what bolts for murena rear wheelhub/discs  (Read 4142 times)
Oskar
Sr. Member
****
Posts: 285



« on: August 28, 2010, 07:51:49 pm »

Ive missplaced the screws for the hub that carries the discbrakes Angry. or maybe I have them but now sure of size etc.
anyone can help with info? now they are on but kinda loose  Roll Eyes Tongue
Logged

peugeot 205 gti
murena 1.6
Philbert
Newbie
*
Posts: 20


Familie'en Philbert's Matra


« Reply #1 on: August 28, 2010, 10:35:42 pm »

Ive missplaced the screws for the hub that carries the discbrakes Angry. or maybe I have them but now sure of size etc.
anyone can help with info? now they are on but kinda loose  Roll Eyes Tongue

Hi Oakar.

Try looking at this post from Oetker, where there are a lot of good photos. I think he also mention the bolt size.

http://www.matrasport.dk/forum/index.php/topic,1591.0.html

Logged
GP
Guest
« Reply #2 on: August 28, 2010, 10:49:24 pm »

Hi Oskar,

Bolts required are M10 x 1.25 x 24mm length. 3/4 thread. HT 12.9. AF 13mm.
Don't forget the special concave spring washers underneath the heads of the bolts which I know as "bellvue washers" i.d. 11mm. x o.d. 20mm. x 2.6mm thickness. Or make alternative arrangements for securing, Loctite or similar.

Hope this helps,

Regards,

Graham,
« Last Edit: August 28, 2010, 10:51:58 pm by GP » Logged
Pages: [1] Print 
« previous next »
Jump to: