Wanted Headlight adjusters -Plastic nut and screw

[Gib]

Can any body help I need up to 6 of these screws and nuts as mine are well past there prime.

[roy4matra]

Can any body help I need up to 6 of these screws and nuts as mine are well past there prime.

Hello James,

Since these are unavailable as far as I'm aware, if you have a full set, then all you need to do is clean them up and refit.  To clean the metal screws you run a die down the threads, and use a tap if necessary in the plastic 'nuts' (I have both taps and dies) and use a file to clean off any burrs.  Refit with grease and adjust.  You shouldn't need to use them much anyway as once they are set, the screws should be tight in the plastic and should stay in position.

Roy

[Gib]

Thanks thought there might be an outlet or alternative for these. Will have to make at least 2 as they are unserviceable.

[Gib]

Made my own not the best but will do until I can get a better solution.