| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] 2 3 ... 23 Print
Author Topic: Getting ready for the road again  (Read 117085 times)
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« on: March 17, 2019, 12:24:31 pm »

So, the old faithful Murena was taken off the road and garaged a couple of years ago. Lack of time maintaining her made it a good decision back then. And frankly, I've been too busy to miss her much, just happy to have her sitting comfortably in a dry, ventilated space.

But the time has come to change the status quo and get some of the work done which was beginning to be pressing when I put her in the garage, especially the paint work which has frankly been dodgy since I bought her. Some of the English Club members may remember my car as "TVP", which from 1986 until Roy took her over, lived her life outside, in London. She had some repaired parking damages, but never a complete respray, only panels done - and frankly, the jobs done left a bit to wish for. So I'm rather looking forward to bringing her back in the pretty shape she deserves Smiley

First, however, I need to work rusty bolts, annoyning rivets, and probably even some glue.

Here's the first photo showing the current state of progress.
« Last Edit: April 21, 2019, 05:28:20 am by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #1 on: March 17, 2019, 12:34:53 pm »

I have a slightly annoying problem with these brackets, which are attaching the rear bumper to the chassis. Each is fitted in the trunk with two bolts. I had to cut the bolts and now I'm left with the nuts in cages with what's remaining of the bolts stuck in them. Here's a couple of options:

  • Fix the nut (which is sitting in a cage on the rear) in a vice and use a strong grip to turn the remains of the bolts out.
  • Grind the edge of the cages so they can be opened enough to remove the nuts and bolts, fit new nuts and weld the cages back
  • Buy new brackets


Any experience/good ideas?
« Last Edit: March 17, 2019, 02:18:07 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Jon Weywadt
YaBB God
*****
Posts: 1002



« Reply #2 on: March 17, 2019, 02:59:27 pm »

I have a slightly annoying problem with these brackets, which are attaching the rear bumper to the chassis. Each is fitted in the trunk with two bolts. I had to cut the bolts and now I'm left with the nuts in cages with what's remaining of the bolts stuck in them. Here's a couple of options:

  • Fix the nut (which is sitting in a cage on the rear) in a vice and use a strong grip to turn the remains of the bolts out.
  • Grind the edge of the cages so they can be opened enough to remove the nuts and bolts, fit new nuts and weld the cages back
  • Buy new brackets


Any experience/good ideas?

Why would you need cages? Grind them off, unless there is no room to get a wrench on the nut while assembling.

Besides, what a beautiful Bosch tool. That is one I am missing in my collection of blue Bosch tools.  Cheesy
Logged

Matranaut par excellence Cool
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #3 on: March 17, 2019, 05:05:27 pm »

Why would you need cages? Grind them off, unless there is no room to get a wrench on the nut while assembling.


You have a point there, Jon! There should be enough space to do it. It won't be easy but since an assistant is needed anyway to hold and align the bumper while assembling, it should be doable Smiley

Quote
Besides, what a beautiful Bosch tool. That is one I am missing in my collection of blue Bosch tools.  Cheesy


It's a lovely little machine! Not that strong and runs on small 100 mm discs, but very efficient and handy Smiley

/Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #4 on: April 06, 2019, 01:02:44 pm »

Work is progressing well as I'm preparing her for the paint job she will eventually be receiving. In the process, I found the glue on the right rear fender being loose and I managed to scrape out the peice of resin shown in the last picture below. This resin doesn't look right to me as I would have expected something more flexible. This indicates to me there has been a repair. The glue on the other side is fine and still seems a bit flexible.

I checked the repair manual, which instructs "dictungsklebestreifen", i.e. sealant strips to be made to refit the fenders. There's a reference number given for a Dichtungskleberpatrone 00 328 173 00. What is the right sealant to use?

I'm not going to remove the fenders, so this will just be filled properly.

« Last Edit: April 06, 2019, 01:32:47 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #5 on: April 06, 2019, 09:52:17 pm »

More progress...
« Last Edit: April 06, 2019, 09:58:57 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
JL
Sr. Member
****
Posts: 254



« Reply #6 on: April 06, 2019, 10:26:51 pm »

Hi Anders
You are making good progress, Upol Tigerseal or any good polyurethane sealer/adhesive will work to attach the rear wing/fender.
Regards
John
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #7 on: April 07, 2019, 02:45:58 pm »

You are making good progress, Upol Tigerseal or any good polyurethane sealer/adhesive will work to attach the rear wing/fender.

Thanks, John! That shouldn't be too much of a problem fixing than.

If it wasn't for work, daily duties, and work on the other cars in the "stable", we'd be progressing much faster Smiley


/Anders
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #8 on: April 14, 2019, 05:19:57 pm »

Had good progress again today as we removed the right hand side sill. the headlights and the front bumper. Still some way to go, and I've also run into a few new issues, e.g. I realized the headlight lifting mechanism is stuck, two of the headlight bolts snapped, and the rear hatch cable boke off by the handle (hence the alternative "keeping hatch closed" feature in the lower picture), but these are just minor issues which are probably easy to fix. And I've been able to check a few boxes in my TODO-list Smiley

/Anders
« Last Edit: April 14, 2019, 05:40:00 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #9 on: April 20, 2019, 01:00:06 pm »

Deciding what to work on and sticking to that is important in order to keep a systematic approach to the work when it's done in spare time, but I changed my mind about working on the rear and has turned the car around in the garage to get started on the front.

There are multiple reasons for that: My garage barely allows me to work around the car, so the end that I'm active on needs to be by the door. Second, finishing something is always good, it doesn't help working on everything at the same time, and the front can be finished now. Third, there are so many rivets, wires, screws, rusty metal parts that actually finishing the front will involve a decent amount of work which will be good to have in status "done" once I take the engine out. Fourth, I can't get the rear done until I remove the exhaust, which I don't want to do until I'm ready to take the engine out.

So below are pictures of her current state. Next up is removing the battery well, shocks, wheels, steering rack and a few other parts to get access to the chassis so that it can be carefully cleaned and zinc sprayed in salty and corroded areas. It looks quite good, though.

I may need a new radiator, by the way.

BTW, the problem with the headlight mechanism was that the vacuum actuator has seized in the shaft. I don't think I can repair it so will need a new one. If someone has one lying around, I'll be willing to pay a good price Smiley
« Last Edit: April 20, 2019, 04:56:55 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
TELBOY
Sr. Member
****
Posts: 422



« Reply #10 on: April 21, 2019, 08:53:55 pm »

Hi there. I had the same problem with my rear bumper brackets! I ground them as flush as I could get them bent the cage where it is not welded and removed them. Then fitted new nuts bent them back into shape and added a spot of weld. That way the bolts could still move along the channel for adjustment. Took about half an hour. 
Logged
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #11 on: April 22, 2019, 06:42:57 am »

Hi there. I had the same problem with my rear bumper brackets! I ground them as flush as I could get them bent the cage where it is not welded and removed them. Then fitted new nuts bent them back into shape and added a spot of weld. That way the bolts could still move along the channel for adjustment. Took about half an hour. 

That's the better solution! The cages are now gone on mine, so a little helper will be needed when we get to refitting the bumper.
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #12 on: April 22, 2019, 07:35:19 pm »

The vacuum actuator turned out to be fixable. I opened it using a pair of pliers. Once opened I could remove the tube in which the shaft should slide. It required a good amount to force to pull it out, but I got it out without visible damage to the shaft.

The problem seems to be the blue O-ring seal, which fits inside the tube and has broken. A part of it has probably found its way down by the shaft and caused it to stick.

It's not a standard round O-ring, but rectangular and slightly conical in cross section, not unlike the seals that fit around brake pistons, so I'll have to do some research to find it. Some kind of grease also need to be applied to the shaft before assembly, and the halves must be cleaned and painted, of course.
« Last Edit: April 22, 2019, 07:38:00 pm by Anders Dinsen » Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Anders Dinsen
Administrator
YaBB God
*****
Posts: 3186



WWW
« Reply #13 on: April 23, 2019, 09:32:18 pm »

So, I've learnt something new today, namely that pneumatic seals are lip seals. The old seal had completely lost its lip! The shaft is 10 mm, the outer diameter of the old seal is 18, and the height appears to be 4 mm.
Logged

1982 Talbot Matra Murena 2.2 prep 142
2017 BMW i3 "Charged Professional" 94Ah

Used to own:
2001 Renault Matra Grand Espace "The Race" V6 24v
1997 Renault Matra Espace 2.0 8V
1987 Renault Matra Espace J11 2.2
Moes
Sr. Member
****
Posts: 171



« Reply #14 on: April 25, 2019, 09:15:37 am »

Hi Anders

Nice to see and follow the work you are doing on your Murena, I am looking forward to see whats next, and the end result  Cheesy 

Have you decided to keep it in red, or are you (and your sons) considering any other colors?

I has been a long time, I would like to stop by some day, when your are working on her.

Best regards Frederik
Logged
Pages: [1] 2 3 ... 23 Print 
« previous next »
Jump to: