| Home  Blogs Help Search Login Register  
« previous next »
Pages: [1] Print
Author Topic: Tightening torque - suspension bridge?  (Read 10158 times)
njesper
Sr. Member
****
Posts: 129



Email
« on: November 01, 2009, 04:00:57 pm »

Dear fellow matra-dudes,

I am curious to know, how much torque (nm), the bolts have to be tightened, when speaking of the four bolts, holding the suspension bridge to the chassis?  :-[



My murena manual, says nothing of this, and I can see the nuts (with the small housing around them), are the same on the bagheera, so if anybody can come up with this info, I would be very happy. Also if anybody have extra nuts like the ones shown in the picture, please reply.  ;D

Best regards,

Jesper
Denmark
Logged
joe
Newbie
*
Posts: 9


Email
« Reply #1 on: November 02, 2009, 06:44:00 pm »

hello
murena's are biggers than bagheera's
on bagh, torque is 5 mkg
Logged
Spyros
Sr. Member
****
Posts: 325

I'm a real donkey!


WWW Email
« Reply #2 on: November 02, 2009, 07:09:45 pm »

hello
murena's are biggers than bagheera's
on bagh, torque is 5 mkg

Mais qu'est-ce qu'tu fais ici, toi ?  :D
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF 2.0.19 | SMF © 2006-2008, Simple Machines LLC