Hi Guys.
I'm Barry from New Zealand and have a 2.2 Murena. Probably the only one down under.
I'm a bit in the dark down here while you guys are in the light. ie. enlightened Matra owners.
Could someone please confirm that I have these numbers correct.
Head bolt tension 90nm
Main Bearing bolt tension 110nm
Conrod bolt tension 65nm
Inlet valve clearance 0.2mm cold
Exhaust valve clearance 0.3mm cold
Thanks Barry
Hi Barry. Welcome to the forum.
I thought this page might have had the torque numbers, but it should also be of interest to you if you have to mount the head.