| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 ... 12 13 [14] 15 16 ... 18 Print
Author Topic: murena restore  (Read 226062 times)
northmurena
Sr. Member
****
Posts: 210



« Reply #195 on: December 23, 2012, 12:48:09 am »

I had also the feeling to sit a little bit higher after renewing the seats with leather. At the same time it feels a little bit harder,more stable but not uncomfortable. I made the seats myself, so i can be sure the foam is still the same, nothing changed or new padded.  So the reason must be that leather is just a little bit stronger than cloth. But i have no problem to get my 1,78 m in. Only sometimes to get 1,78m out but that must be the age ;-)

Hilsen

Kai
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #196 on: December 23, 2012, 10:52:25 am »

What nice interiors!

When I sat in the car first time after getting it back from the upholsterer I was wondering how high I was sitting, but I was not sure in the changing, because I had not sat in the car for a long time. Maybe I lost some centimeters above my head because of the new cushion in the seat but I still have some space (I am 1,85). Not so much, but I still have to find the right position for driving when the interior is fully completed.

I am thinking of getting a D-type steering wheel (as Oetker suggested) to gain more leg room, but quite rare to find. I have some leather left from the upholsterer so it would be good to buy a used and worn steering wheel (hopefully cheaper than a new one) and have it covered with the same brown leather as the dashboard has. In another post GP mentioned a Sparco (353 if I remember well) which is very nice, but a new one is very expensive and of course not brown.

I have found the style what I like and matches to the car (I think) but not D-type... Undecided
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #197 on: December 23, 2012, 01:06:54 pm »

Have a closer look at the Momo.
You will see the hart of the steering is out of the middle.
That give almost the same effect driving in a straight line.  Wink

My 2.2 has it to.



Ooops...Needt to loose some weight I think, because otherwise I want fit at all in the car in time.

Greet Herman
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #198 on: December 23, 2012, 01:38:42 pm »

Smiley
Sometimes fixing something is not too comfortable. I know it from my profession...

Do you think that the Momo Corse that was attached in my former post has the same effect? Maybe yes. It would cost about €30, and need retrimming. If the seller still has it...
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #199 on: December 23, 2012, 02:07:27 pm »

Smiley
Sometimes fixing something is not too comfortable. I know it from my profession...

Do you think that the Momo Corse that was attached in my former post has the same effect? Maybe yes. It would cost about €30, and need retrimming. If the seller still has it...

Make the picture bigger and measure.
I did, and I am pretty certain it is.
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #200 on: December 23, 2012, 02:35:25 pm »

Yes, you are probably right. It's diameter is 320mm, so the upper part is about 170mm and the lower part is  about 150mm. But my measurment may contain some parallax fault...

Thanks for the info.
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #201 on: December 23, 2012, 05:48:04 pm »

I have to tidy up the fuel lines in the engine bay but I can not find suitable plastic hose clamps to the front edge of the hatch where the hose goes from the fuel tank to the fuel pump. Is it possible to find some on e-bay?

Logged
TimS
Sr. Member
****
Posts: 179



« Reply #202 on: December 23, 2012, 06:48:56 pm »

I'm looking for those as well. No luck yet.
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #203 on: December 23, 2012, 07:46:18 pm »

Not original, but how about this.

http://www.ebay.co.uk/itm/100-x-BLACK-2-5mm-100mm-Push-Mount-Cable-Ties-Panel-Chassis-Fixing-Tie-Base-/190770023606?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item2c6ac78cb6

Also bigger
http://www.ebay.co.uk/itm/100-x-BLACK-4-8mm-100mm-Push-Mount-Cable-Ties-Panel-Chassis-Fixing-Tie-Base-/400363705392?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item5d37895430
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #204 on: December 23, 2012, 08:20:40 pm »

That's ok. I could not find any cable tie with mounting point, so many thanks.
Unfortunately I cannot see the hole size of the mounting point. I will contact the seller...
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #205 on: December 23, 2012, 08:30:47 pm »

I did not need them yet, but looks good for the front to.
Will order some for myself as well.
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
JL
Sr. Member
****
Posts: 254



« Reply #206 on: December 23, 2012, 11:19:20 pm »

I have used these before,

http://www.cbsonline.co.uk/product/Self_Adhesive_Cable_Tie_Bases_25mm_Square_CTBAS

http://www.cbsonline.co.uk/product/Cable_Tie_Bases_Mini_25pcs_MCTBAS

Although I did use rivets on the self adhesive ones as an insurance policy.

Regards
John
Logged
JV
Sr. Member
****
Posts: 137


« Reply #207 on: December 24, 2012, 06:12:52 pm »

I did not need them yet, but looks good for the front to.
Will order some for myself as well.

Herman,


I like to have some also.
Can I buy these from you dividing the costs of delivery?

Jan
« Last Edit: December 24, 2012, 06:16:02 pm by JV » Logged

Jan Verdam
Matra Murena 2.2S bleue columbia
Oetker
YaBB God
*****
Posts: 1097



« Reply #208 on: December 24, 2012, 10:37:44 pm »

@ jan.

I ordered a the biger ones 4,5 mm.
I reserve some for you.
New years meeting Belgium ?

Greetings Herman
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
JV
Sr. Member
****
Posts: 137


« Reply #209 on: December 25, 2012, 04:04:32 pm »

OK
Logged

Jan Verdam
Matra Murena 2.2S bleue columbia
Pages: 1 ... 12 13 [14] 15 16 ... 18 Print 
« previous next »
Jump to: