| Home  Blogs Help Search Login Register  
« previous next »
Pages: 1 ... 3 4 [5] 6 7 ... 18 Print
Author Topic: murena restore  (Read 194668 times)
GP
Sr. Member
****
Posts: 302



« Reply #60 on: May 09, 2012, 12:34:08 pm »

Some brace bars are mounted inside the wings. Pictures attached.

I have a couple of rusty spares if you want them?

GP
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #61 on: May 09, 2012, 05:17:08 pm »

Thanks.
I found the bars among the galvanised spares. Now I know how to install them.
Logged
GP
Sr. Member
****
Posts: 302



« Reply #62 on: May 09, 2012, 08:41:39 pm »

If I could speak French....   Roll Eyes

Of course, but I just wanted to show you the font type. One of the pictures shows it quite well.

I have attached a PDF File which shows the font type and a photo.

The 2.2 shown is not a good reproduction but the murena and TALBOT - MATRA are pretty spot on.

Length and height of the TALBOT - MATRA is 520mm x 44mm.

Hope this helps.

Graham

Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #63 on: May 09, 2012, 08:55:07 pm »

There is almost no character with the same width size.
I think it's best to order this with the specific dealers to get it right.
I have seen more copy's that are a bad reproduction.
Especial the M and O are different.

« Last Edit: May 09, 2012, 09:00:55 pm by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
Oetker
YaBB God
*****
Posts: 1097



« Reply #64 on: May 09, 2012, 09:00:27 pm »

Csaba the beer arrived and it made me smile.
The last time I was in hungary it was before the fall of the iron curtain.
This luxury beer was not for sale as far as I remember and most of the time I got Tuborrg witch I didn't like.
I always went to the local beerhouses and drunk the local misty beers.
I liked them very much.

Thank you I will wait for a nice day with good weather to drink it.

Cheers.
Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #65 on: May 09, 2012, 09:04:11 pm »

Thanks GP. Yes, it helps.

I have a friend who has equipment to reproduce the decals. I think it will cost some beers so it worth a try. Smiley
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #66 on: May 09, 2012, 09:09:25 pm »

Csaba the beer arrived and it made me smile.
The last time I was in hungary it was before the fall of the iron curtain.
This luxury beer was not for sale as far as I remember and most of the time I got Tuborrg witch I didn't like.
I always went to the local beerhouses and drunk the local misty beers.
I liked them very much.

Thank you I will wait for a nice day with good weather to drink it.

Cheers.


You are welcome.

'before the fall of the iron curtain' - That time I was a child, but still remember the old beers (only the bottles, not the taste). Smiley
I hope you feel much better.

Cheers.

Today I installed the small part in the headlight, tomorrow I will seal the glass. Thanks again.
« Last Edit: May 09, 2012, 09:15:29 pm by klumzer » Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #67 on: May 11, 2012, 10:36:57 pm »

Does the roof antenna have equivalence with any cars?
Otherwise I have to revive the original...
Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #68 on: May 12, 2012, 12:40:11 am »

This looks pretty close to the original.

http://www.ebay.co.uk/itm/PEUGEOT-CITROEN-ROOF-AERIAL-106-205-206-306-406-SAXO-/220288223217?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item334a3387f1

« Last Edit: May 12, 2012, 12:44:27 am by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #69 on: May 12, 2012, 08:26:35 pm »

Thanks. Today I saw some cars with similiar antennas so I will do some research before buying.

Some pictures of my project. Wiring is a bit tidy but getting better... Smiley
« Last Edit: May 12, 2012, 08:28:55 pm by klumzer » Logged
Oetker
YaBB God
*****
Posts: 1097



« Reply #70 on: May 14, 2012, 11:06:53 pm »

Looks nice and tidy.
I filled my connectors with vaseline acidfree.
It makes the wiring water resistant.

Then take a piece oft bike tire.
It will prevent corrosion wich is a weak point in the connectors.


Some other pics of soldering new spades and relais.



Because of always back coming problems I did this.
Perfect solution.
No more probs there.



« Last Edit: May 14, 2012, 11:15:23 pm by Oetker » Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
RazorbackNOR
Sr. Member
****
Posts: 494



« Reply #71 on: May 15, 2012, 01:27:21 pm »


Because of always back coming problems I did this.
Perfect solution.
No more probs there.





Ehm... what excactly did you do to it.....?
Logged

2010 Mazda 3 1,6  Diesel Gunmetal Blue
1983 Matra Murena 2.2 Platine
50cc Pocketbike
IPSC shooter
Oetker
YaBB God
*****
Posts: 1097



« Reply #72 on: May 15, 2012, 04:06:23 pm »


Because of always back coming problems I did this.
Perfect solution.
No more probs there.


Ehm... what excactly did you do to it.....?

Took the connectors off and soldered the wires on the print.
Therefore I drilled holes and sticked the wires in.
On the upper side of the print I made tin bubble so there is no stress on the print itself.


Logged

I feel like Jonah, only my fish looks different.
Murena 2.2 Red 1982. Murena 1.6 black on places.
klumzer
Sr. Member
****
Posts: 370



« Reply #73 on: May 15, 2012, 08:23:16 pm »

Thank you for the tips.
I have already read some of them on the forum. The bike tube is a pretty good idea to replace the old shreddy rubber.
Logged
klumzer
Sr. Member
****
Posts: 370



« Reply #74 on: June 02, 2012, 08:14:16 pm »

I got the engine mounting bushes at last.  Smiley
Those were the most difficult things to get so far...

I have a question concerning the gearbox mounting point. What should be there exactly between the mounting plates on the chassis?
There are inserts pressed into each side of the inner ring and I have some spacers with different thickness. But I can see something in the parts catalog, 'spielbegrenzer - 02021'. What is it?

« Last Edit: June 06, 2012, 10:38:30 pm by klumzer » Logged
Pages: 1 ... 3 4 [5] 6 7 ... 18 Print 
« previous next »
Jump to: